We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51944

14.2 install - XPS produces an INTERNAL_ERROR when launched from PlanAhead


I downloaded and installed Xilinx ISE14.2/Vivado 2012.2 to begin using Zynq and I also have a WebPACK license.

However, if XPS is launched from PlanAhead, it produces the following error:


INTERNAL_ERROR:PersonalityModule:baspmspec.c:1751:1.79 - Could not load definition file <qvirtex6.acd>


This error currently occurs if you have the ISE 14.2/Vivado 2012.2 WebPACK Edition installed on your PC.

You need to install Logic Edition or higher to work around this issue. 

The work-around is to uninstall this WebPACK edition of the tools and install, for example, a full ISE Logic Edition instead.

This will resolve the error. 

AR# 51944
Date 06/09/2014
Status Archive
Type General Article
  • ISE Design Suite - 14.1
  • ISE Design Suite - 14.2
  • ISE Design Suite - 14.3
Page Bookmarked