We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52022

Zynq-7000 AP SoC, Debug - System Debug Reset does not work


If the ARM PS DAP controller is used to issue a System Debug Reset, the PS will hang.


Impact: Minor. Debut using the external pin is still possible.
Work-around: None.
Configurations Affected: All configurations when Reset through PS DAP is required.
Device Revision(s) Affected: Refer to (Xilinx Answer 47916) - Zynq-7000 Design Advisory Master Answer Record.
AR# 52022
Date 10/25/2012
Status Active
Type Design Advisory
  • Zynq-7000
Page Bookmarked