You are using a deprecated Browser. Internet Explorer is no longer supported by Xilinx.
14.x Zynq-7000 SoC iMPACT - QSPI programming on the ZC706 (7045 all silicon revs) requires the Zynq device to boot in JTAG mode
14.x iMPACT QSPI programming with 7045 (all silicon revs) requires that the device boot in JTAG mode.
To work around this issue, set the boot mode pins to JTAG.
Was this Answer Record helpful?
Linked Answer Records
Master Answer Records
|Boards & Kits
- Zynq-7000 SoC ZC706 Evaluation Kit