UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52082

Getting Started with the Kintex-7 FPGA KC705 Embedded Kit (UG913) v1.0 - There is no reference to J69

Description

The Getting Started with the Kintex-7 FPGA KC705 Embedded Kit User Guide (UG913) v1.0 does not reference the J69 jumper.

How should this jumper be set to ensure the Targeted Reference Design runs correctly?

Solution

If you are running the Targeted Reference Design on the KC705 Embedded Kit, jumper J69 needs to be set correctly. The default jumper setting for J69 is across pins 1-2.
Jumper settings required to run the Video Demonstration can now be found in UG913, v1.2.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
52970 Kintex-7 FPGA Embedded Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 52082
Date Created 09/28/2012
Last Updated 02/01/2013
Status Active
Type General Article
Boards & Kits
  • Kintex-7 FPGA Embedded Kit