We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52364

14.3/4 ChipScope/iMPACT - Configuring a Virtex-7 XC7VH580T device with a bitstream generated in BitGen 14.2 causes the tool to crash


Configuring a Virtex-7 XC7VH580T device using the 14.3 or laterversion of the ChipScope or iMPACT tools causes a crash if the bitstream that is used is generated with BitGen 14.2.

How do I work around this issue?


There are two ways to work around this issue:

  • Use the ChipScope or iMPACT 14.2 tools
  • Regenerate the bitstream in 14.3 or a later version. You must re-run the GT Wizard when regenerating the bitstream.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
47890 14.x iMPACT - Known Issues for the iMPACT 14.x tools N/A N/A
AR# 52364
Date 11/27/2012
Status Archive
Type General Article
  • Virtex-7
  • ISE Design Suite - 14.3
  • ISE Design Suite - 14.4
Page Bookmarked