iMPACT 14.2/14.3 fail to detect an attached SPI flash on some Spartan-6 devices. If attempting an Indirect programming operation the core file will load, but subsequently the operation fails with the following messages:
Validating chain...
Boundary-scan chain validated successfully.
'1': IDCODE is '000000' (in hex).
'1': ID Check failed.
INFO:iMPACT:2488 - The operation did not complete successfully.
INFO:iMPACT - SPI Device not found.
How do I work around this issue?
This issue is resolved in iMPACT 14.4. It only occurs in iMPACT 14.2 and 14.3.
| Answer Number | Answer Title | Version Found | Version Resolved |
|---|---|---|---|
| 47890 | 14.x iMPACT - Known Issues for the iMPACT 14.x tools | N/A | N/A |
| AR# 52567 | |
|---|---|
| Date | 02/11/2013 |
| Status | Active |
| Type | General Article |
| Devices | |
| Tools | |