We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52699

ZC70x - Power - Timing Recommendation for Reconfiguration From SD and MIO Interfaces


Reboot and reconfiguration of the ZC70x boards from the SD card MIO interface should include a 5 second delay between power off and powering back on.


This delay before powering the board back ON allows the board's power to bleed down to zero. This ensures proper power on sequencing of the board.
AR# 52699
Date 05/17/2018
Status Active
Type General Article
Boards & Kits
  • Zynq-7000 SoC ZC702 Evaluation Kit
  • Zynq-7000 SoC ZC706 Evaluation Kit
Page Bookmarked