UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53059

KC705 User Guide v1.1 (UG810) - SiT9102 Oscillator frequency stability incorrect

Description

The KC705 Evaluation Board for the Kintex-7 FPGA User Guide v1.1 (UG810) lists the PPM frequency jitter as 20 ppm.

However, the data sheet for the SiT9102AI-243N25E200.00000 oscillator, described in UG810, lists a frequency stability of 50 ppm.

Which value is correct?

Solution

The data sheet for the SiT9102AI-243N25E200.00000 is correct; the PPM frequency jitter for the SiT9102 device used on the KC705 Evaluation Board is 50 ppm.

The KC705 Evaluation Board for the Kintex-7 FPGA User Guide (UG810), (v1.2) has beenupdated with the correct frequency stability figure.

AR# 53059
Date Created 11/26/2012
Last Updated 02/11/2013
Status Active
Type General Article
Boards & Kits
  • Kintex-7 FPGA KC705 Evaluation Kit