We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53317

7 Series FPGAs Transceivers Wizard v2.3 and earlier - LPM manual mode support


The 7 Series FPGAs Transceivers Wizard v2.3 and earlier in ISE 14.3/Vivado 2012.3 or earlier tools incorrectly show selection for LPM manual mode on page 4 of the GUI for GTX/GTH transceivers.


When this LPM manual mode is selected, the wizard sets the default RXLPMEN port to 0, which puts the equalization in DFE mode. This option to select LPM manual is incorrectly enabled by the wizard and this option is removed in the next version.

The LPM manual mode selection available in v2.3 or earlier version of the wizard should not be used.

AR# 53317
Date 04/01/2013
Status Active
Type General Article
  • Virtex-7
  • Kintex-7
Page Bookmarked