UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - All Programmable
  2. Support
  3. AR# 53453: Zynq-7000 AP SoC ZC706 Evaluation Kit - GPIO_LED_0 not listed in Table 1-27 of UG954 (v1.1)

AR# 53453

Zynq-7000 AP SoC ZC706 Evaluation Kit - GPIO_LED_0 not listed in Table 1-27 of UG954 (v1.1)

Description

In the ZC706 Evaluation Board User Guide v1.1 (UG954), Table 1-27 lists the Status and User LEDs, but does not list the GPIO_LED_0 user LED which is mentioned in the User I/O and User LED sections of UG954, and also listed in Table 1-28.

Solution

GPIO_LED_0 should be listed in Table 1-27 of the ZC706 Evaluation Board User Guide v1.1( UG954). However, this has been added to Table 1-27 in v1.2 of the ZC706 Evaluation Board User Guide (UG954).

If you are looking for information on GPIO_LED_0, please reference the ZC706 Master UCF and Table 1-28 of UG954:
http://www.xilinx.com/support/documentation/boards_and_kits/ug954-zc706-eval-board-xc7z045-ap-soc.pdf

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
51899 Zynq-7000 AP SoC ZC706 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 53453
Date 05/10/2013
Status Active
Type General Article
Boards & Kits
  • Zynq-7000 All Programmable SoC ZC706 Evaluation Kit
Page Bookmarked