We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53599

Zynq-7000 Boards and Kits - ZC702 and ZC706 Master XML File for TI Power Controller


The ZC702 and ZC706 evaluation platforms use TI power controllers.

ZC702 uses a UCD9240 controller, and ZC706 uses a UCD90120 controller.

These power controllers require an XML configuration file in order to function as intended on these platforms.

NOTE: For ZC706 Rev. B, please use the dedicated XML files for rev B attached to the end of this answer record ONLY.

NOTE: For ZC706 Rev 1.0 and beyond, please use the dedicated XML files for rev 1.0 attached to the end of this answer record ONLY.


The attached XML files can be used to restore the power controller on a ZC706 or ZC702 evaluation platform to the factory default configuration.

Only re-program the power controller with an XML file intended for your specific board.


Associated Attachments

Linked Answer Records

Master Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
51438 ZC702 - PG signal does not assert by default N/A N/A
AR# 53599
Date 05/16/2018
Status Active
Type General Article
  • SoC
Boards & Kits
  • Zynq-7000 SoC ZC702 Evaluation Kit
  • Zynq-7000 SoC ZC706 Evaluation Kit
Page Bookmarked