You are using a deprecated Browser. Internet Explorer is no longer supported by Xilinx.
LogiCORE IP Ten Gigabit Ethernet PCS/PMA (10GBASE-R/10GBASE-KR) v2.6 - DRP Read and Writes not initiated for Training interface or PRBS testing
When using the Ten Gigabit Ethernet PCS/PMA (10GBASE-R/10GBASE-KR) v2.6 core, DRP Read and Writes are not initiated for the training interface or PRBS testing.
The training interface is only available when using the 10GBASE-KR version of the core.
When using both 10GBASE-R and 10GBASE-KR, DRP reads will not be initiated when checking for received PRBS errors.
This was not an issue in previous versions of the core.
This issue has been fixed in the v2.6 rev1 update (attached at the end of this answer record) along with these other updates:
- (Xilinx Answer 53974) - Incorrect version number in core info register - was still at v2.5
- Incorrect link to v2.5 PG068 in PDF redirect doc
To install the patch, follow the instructions in the included readme file.
Was this Answer Record helpful?
- 10 Gigabit Ethernet PCS-PMA with FEC/Auto-Negotiation for backplanes (10GBASE-KR)
- Ten Gigabit Ethernet PCS/PMA