AR# 53809: 14.4 PlanAhead - When creating a project for the ZC706 Evaluation Kit in PlanAhead 14.4, the corresponding part is incorrect
AR# 53809
14.4 PlanAhead - When creating a project for the ZC706 Evaluation Kit in PlanAhead 14.4, the corresponding part is incorrect
Description
When creating a project for the ZC706 Evaluation Kit in PlanAhead 14.4, the part is incorrect.
The part that appears for the ZC706 Board is xc7z045ffg900-1. However, the part on the board according to the board User Guide and board webpage is not -1 speed grade, it is -2 speed grade.
Solution
The ZC706 board is built with a -2 speed grade part and not -1.
To work around this issue, manually select the part in PlanAhead tool when creating a project, rather than selecting by specifying a board.
This issue has been fixed in PlanAhead tool 14.5.
Was this Answer Record helpful?
AR# 53809
Date
04/05/2013
Status
Archive
Type
Known Issues
Devices
Zynq-7000
Tools
ISE Design Suite
Boards & Kits
Zynq-7000 All Programmable SoC ZC706 Evaluation Kit