UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
Page Bookmarked
  1. Xilinx - All Programmable
  2. Support
  3. AR# 53895: 14.4 / 2012.4 Install - What tools need to have the LD_LIBRARY_PATH set?

AR# 53895

14.4 / 2012.4 Install - What tools need to have the LD_LIBRARY_PATH set?

Description

What tools require the LD_LIBRARY_PATH and how is this setup within the Xilinx toolset?

Solution

The LD_LIBRARY_PATH is automatically set when running the scripts provided within the installation (e.g., settings64.sh). If you do not use these scripts, then you will need to make sure to set the LD_LIBRARY_PATH for the following tools:

  • DSP/Sysgen tools
  • ChipScope tools (cs_jtag_info, InserterServer)
  • compxlib (due to 3rd party calls)
AR# 53895
Date 02/14/2013
Status Archive
Type General Article
Tools
  • Vivado
  • ISE Design Suite
  • ChipScope Pro
  • System Generator for DSP