AR# 54432


IP Release Notes and Known Issues for LogiCORE AXI USB 2.0 Device for Vivado 2013.4 and older tool versions


This answer record contains the Release Notes and Known Issues for the AXI USB 2.0 Device and includes the following:
  • General Information
  • Known and Resolved Issues
  • Revision History
This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.4 and older tool versions
Please reference XTP025 - IP Release Notes Guide for past known issue logs and ISE support information.

LogiCORE AXI USB 2.0 Device IP Page:


General Information

Supported Devices can be found in the following three locations:

For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado Design Suite.

Version Table

This table correlates the core version to the first Vivado design tools release version in which it was included.

Core Version Vivado Tools Version
5.0 2013.4
4.0 2013.1
3.02.a 2012.4

General Guidance

The table below provides Answer Records for general guidance when using the LogiCORE AXI USB 2.0 Device.

Article Number Article Title
(Xilinx Answer 55248) Vivado Timing and IP Constraints
(Xilinx Answer 43789) 13.2 EDK - How to access ULPI UPAR registers on USB2 Device
(Xilinx Answer 40302) 13.1 EDK, XPS or AXI USB2 Device ERROR:EDK - [axi/xps]_usb2_device_0 - can't use empty string as operand of "/"

Known and Resolved Issues

The following table provides known issues for the AXI USB 2.0 Device, starting with v4.0, initially released in Vivado tools 2013.1.

The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

There are no known issues for this IP core in Vivado tools 2013.4

Article Number Article Title Version Found Version Resolved

Revision History:
04/03/2013 - Initial Release
AR# 54432
Date 11/11/2014
Status Active
Type Release Notes
People Also Viewed