This answer record contains the Release Notes and Known Issues for MicroBlaze and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.4 and older tool versions
Please reference XTP025 - IP Release Notes Guide for past known issue logs and ISE support information.
MicroBlaze IP Page:
http://www.xilinx.com/tools/microblaze.htm
General Information
Supported devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
Version Table
This table correlates the core version to the first Vivado design tools release version in which it was included.
Core Version | Vivado Tools Version |
---|---|
9.0 | 2013.1 |
8.40.b | 2012.4 |
General Guidance
The table below provides answer records for general guidance when using MicroBlaze.
Answer Record | Title |
---|---|
(Xilinx Answer 55248) | Vivado Timing and IP Constraints |
(Xilinx Answer 45406) | 13.3 EDK - "ERROR:EDK:1602 - IPNAME:microblaze not supported for architecture 'qrvirtex5'!" |
(Xilinx Answer 46824) | 14.4 - XPS MicroBlaze - MicroBlaze v8.40_b changelog |
Known and Resolved Issues
The following table provides known issues for MicroBlaze, starting with v9.0, initially released in the Vivado 2013.1 tool.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
There are no known issue for the Vivado 2013.4 tool.
Answer Record | Title | Version Found | Version Resolved |
---|---|---|---|
Revision History
04/03/2013 - Initial release
12/18/2013 - Updated for 2013.4
AR# 54437 | |
---|---|
Date | 12/05/2013 |
Status | Active |
Type | Release Notes |
IP |