This answer record contains the Release Notes and Known Issues for the LogiCORE IP 3GPP LTE MIMO Encoder core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.1 and newer tool versions.
Please reference XTP025 - IP Release Notes Guide for past known issue logs and ISE support information.
LogiCORE IP 3GPP LTE MIMO Encoder core IP Page:
Supported Devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
This table correlates the core version to the first Vivado design tools release version in which it was included.
|Core Version||Vivado Tools Version|
The table below provides Answer Records for general guidance when using the LogiCORE IP 3GPP LTE MIMO Encoder core.
Known and Resolved Issues
The following table provides known issues for the LogiCORE IP 3GPP LTE MIMO Encoder core, starting with v4.0, initially released in Vivado 2013.1.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
|(Xilinx Answer 59564)||The event signals will always be '0'||v4.0(Rev. 4)||N/A|
|(Xilinx Answer 53465)||2012.4 Vivado Simulator - Why does my DSP Digital Communications core fail to simulate with Error: Failed to find design work <Core name>?||v3.0||v4.0|
03/18/2014 - Added (Xilinx Answer 59564)
04/03/2013 - Initial release