This answer record contains the Release Notes and Known Issues for the LogiCORE IP G.975.1 EFEC I.4 Encoder/Decoder core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.1 and newer tool versions.
LogiCORE IP G.975.1 EFEC I.4 Encoder/Decoder core IP Page:
Supported devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado tools.
Table 1 correlates the core version to the first Vivado design tools release version in which it was included.
Table 1: Version
|Vivado Tools |
|v1.0 (Rev. 4)||2014.1|
Table 2 provides answer records for general guidance when using the LogiCORE IP G.975.1 EFEC I.4 Encoder/Decoder core.
Table 2: General Guidance
Known and Resolved Issues
The following table provides known issues for the LogiCORE IP G.975.1 EFEC I.4 Encoder/Decoder core, starting with v6.0, initially released in Vivado 2013.1.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
|(Xilinx Answer 60041)||Why does the post-synthesis simulation results vary from the behavioral simulation results in 2014.1?||v1.0 (Rev. 4)||N/A|
04/16/2014 - Added v1.0 (Rev. 4) to Version Table and (Xilinx Answer 60041)
12/18/2013 - Updated for 2013.4
04/03/2013 - Initial release