This answer record contains the Release Notes and Known Issues for the LogiCORE IP SMPTE2022-1/2 Video Over IP Receiver Core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in the Vivado 2013.1 tool and later versions.
LogiCORE IP SMPTE2022-1/2 Video Over IP Receiver Core IP Page:
Supported Devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
This table correlates the core version to the first Vivado design tools release version in which it was included.
|Core Version||Vivado Tools Version|
|v2.0 (Rev. 9)||2017.1|
|v2.0 (Rev. 8)||2016.4|
|v2.0 (Rev. 7)||2016.3|
|v2.0 (Rev. 6)||2016.2|
|v2.0 (Rev. 5)||2016.1|
|v2.0 (Rev. 4)||2015.4|
|v2.0 (Rev. 3)||2015.3|
|v2.0 (Rev. 2)||2015.1|
|v2.0 (Rev. 1)||2014.4|
|v1.0 (Rev. 3)||2014.2|
|v1.0 (Rev. 2)||2014.1|
|v1.0 (Rev. 1)||2013.4|
The table below provides Answer Records for general guidance when using the LogiCORE IP SMPTE2022-1/2 Video Over IP Receiver Core.
|(Xilinx Answer 61336)||How do I reduce the transport stream (TS) jitter at the SMPTE2022-1/2 RX?|
Known and Resolved Issues
The following table provides known issues for the LogiCORE IP SMPTE2022-1/2 Video Over IP Receiver Core, starting with v1.0, initially released in the Vivado 2013.3 tool.
Note: The "Version Found" column lists the version the problem was first discovered.
The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
|(Xilinx Answer 62219)||Why do I see a negative slack violation when generating with 8 Channels and Forward Error Correction (FEC) and Seamless Switching enabled?||v2.0||N/A|
|04/05/2017||Added v2.0 (Rev.6), v2.0 (Rev.7), v2.0 (Rev.8) and v2.0 (Rev.9) Version Table|
|04/06/2016||Added v2.0 (Rev.1), v2.0 (Rev.2), v2.0 (Rev.3), v2.0 (Rev. 4) and v2.0 (Rev.5) Version Table|
|10/08/2014||Added v1.0 (Rev.1), v1.0 (Rev.2), v1.0 (Rev.3) and v2.0 Version Table and (Xilinx Answer 62219)|
|07/02/2014||Added (Xilinx Answer 61336)|