This answer record contains the Release Notes and Known Issues for the Video to LogiCORE SDI TX Bridge Core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in the Vivado 2013.1 tool and later versions.
LogiCORE IP Video to SDI TX Bridge Core IP Page:
NOTE: Not recommended for new designs. The core is removed from IP catalog as of 2014.2.
Users who need a bridge from SDI to AXI can request an unsupported copy of the source code for the SDI Bridges from the SDI to Video Brides lounge.
Supported devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
Table 1: Version
This table correlates the core version to the first Vivado design tools release version in which it was included.
|Vivado Tools |
Table 2: General Guidance
The table below provides answer records for general guidance when using the LogiCORE IP Video to SDI TX Bridge Core.
|(Xilinx Answer 60724)||No output from the core|
|(Xilinx Answer 60725)||How should I connect the core's clock enables?|
Known and Resolved Issues
The following table provides known issues for the Video to SDI TX Bridge core, starting with v1.0, initially released in Vivado 2013.3.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
10/23/2013 - Initial release