AR# 54553

2012.4/14.4 - XPS - Enabling GPIO on EMIO Interface Not Possible When Using Processing System 7 v4.02a

When using Processing System 7 v4.02a the "Enable GPIO on EMIO Interface" cannot be changed in the PS to PL Interface configuration dialog box.

This option can be found under "General" in the "User" tab.

For versions 4.01a and below this works as expected.

As a workaround this parameter can be set in the MHS file:

PARAMETER C_EN_EMIO_GPIO = 1

Was this Answer Record helpful?

AR# 54553
Date	09/15/2014
Status	Active
Type	General Article
Devices	Zynq-7000
Tools	ISE Design Suite - 14 Vivado Design Suite - 2012.4

Page Bookmarked