UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54559

14.4 - EDK - XPS - How can I make the AXI Datamover's M_AXIS_MM2S and S_AXIS_S2MM bus interfaces external?

Description

How can I make the AXI Datamover's M_AXIS_MM2Sand S_AXIS_S2MM bus interfaces external?

Solution

By default the M_AXIS_MM2Sand S_AXIS_S2MM bus interfaces are not added under the ports tab. To add these, check the "Port Filters -> By Connection -> Defaults in the XPS System Assembly view on the far right of the GUI.

Note: The XPS tool will add a buffer by default on all external ports. To stop the tools from doing this, use the buffer_type=none keyword in the external port definition in the MHS file in XPS. See (Xilinx Answer 53769) for help here.

Note: This flow is not tested by Xilinx.

AR# 54559
Date Created 02/25/2013
Last Updated 02/25/2013
Status Active
Type General Article
Tools
  • EDK - 14.4