UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54577

Install - Is WebPack version 6.2 the same as Foundation ISE version 6.2 and how to get the registration ID for 6.2 ISE ?

Description

  1. Is WebPack version 6.2 the same as Foundation ISE version 6.2?
     
  2. How can I get the registration ID for 6.2 ISE?

Solution

1) No, there are a number of differences. 

The main differences are in Device support, and WebPack also has some limited feature support (simulator).


2) To get the Registration ID, open the Xilinx Licensing Solution Center.

From the Licensing Solution Center, click the "Need to generate a Registration ID for legacy Product?" link. (shown below):


legacy_regID.jpg
C
lick "obtain a Registration ID for 7.1 or earlier."

Note: The "Legacy Licensing" tab referred to in the ISE Install & release notes (http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_7/irn.pdf) was removed in September 2014. 

The License Solution Center link provided above should be used to obtain Registration IDs for ISE 10 and older software.

See also: License FAQ below: http://www.xilinx.com/tools/faq.htm


 

AR# 54577
Date Created 02/25/2013
Last Updated 11/27/2014
Status Active
Type General Article
Devices
  • FPGA Device Families
  • CPLD Device Families
Tools
  • ISE - Legacy