We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54971

SDK 14.4, Zynq-7000 AP SoC - Specifying explicit offset for data files in BIF generates incorrect .MCS, but correct .BIN


If an explicit offset is specified for a data file in the BIF file using SDK (Create Zynq Boot Image), the MCS file does not correctly place the data.


To work around this issue, convert the correct .BIN file into .MCS using PROMGen command line:

promgen -b -data_file up 0 bootgen.bin -o bootgen.mcs

Note: For more PROMGen command line options, see the chapter 17 in the Xilinx Command Line User Guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/devref.pdf

AR# 54971
Date 05/23/2013
Status Active
Type Known Issues
  • Zynq-7000
  • EDK - 14.4
Page Bookmarked