We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55036

Spartan-3A/-3AN/-3A DSP, Spartan-6, Virtex-6 and 7 Series - If ABORT is triggered and JTAG operations are run, this can result in failures


If I use SelectMAP mode or the ICAP interface, if an ABORT sequence is triggered and then I run a JTAG operation (i.e., iMPACT Program or Verify), failures are sometimes seen.

Please reference the appropriate Configuration User guide for details on the ABORT sequence for each family.


If JTAG operations need to be run, please ensure the ABORT sequence is not triggered.
AR# 55036
Date 04/29/2013
Status Active
Type General Article
  • Artix-7
  • Kintex-7
  • Spartan-6
  • More
  • Virtex-6
  • Virtex-7
  • Spartan-3A
  • Spartan-3A DSP
  • Spartan-3AN
  • Less
  • ISE Design Suite - 14
Page Bookmarked