AR# 55105

|

LogiCORE IP Discrete Fourier Transform (DFT) v4.0 - Auto upgrade from Discrete Fourier Transform (DFT) v3.1 to the Discrete Fourier Transform (DFT) v4.0 fails

Description

Auto upgrade from Discrete Fourier Transform (DFT) v3.1 to the Discrete Fourier Transform (DFT) v4.0 fails.

"ERROR: [IP_Flow 19-201] Failed to write XCO file '/proj/xresults_ipsgrp/ipv/seshadr/Upgrade_IP/2013.1_0219_1/dft_v4_0_3_1/project_2/project_2.srcs/sources_1/ip/dft_V2V_UG_CHECK/dft_V2V_UG_CHECK.xco'."

Solution

This is a known issue. You need to manually upgrade the Discrete Fourier Transform (DFT) v3.1 to the Discrete Fourier Transform (DFT) v4.0.

Linked Answer Records

Master Answer Records

AR# 55105
Date 04/03/2013
Status Active
Type General Article
IP
People Also Viewed