UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55376

14.5 - SDK - MicroBlaze is not reset when using Debug As with Reset Type set as Reset Entire System

Description

I am debugging in SDK with the Reset Type debug configuration setting set to Reset Entire System. However, after restarting the application, the MicroBlaze processor is not reset to its default settings. This makes debugging cumbersome.

How can I address this issue?

Solution

To work around this issue, open XMD from within SDK (Xilinx Tools -> XMD Console), and use the XMD commands below:

XMD% stop
XMD% rst

Now re-launch the debug and everything should be working as expected.

AR# 55376
Date Created 04/04/2013
Last Updated 06/26/2013
Status Active
Type General Article
Tools
  • EDK - 14.4
  • EDK - 14.3
  • EDK - 14.2
  • EDK - 14.5
IP
  • Microblaze