AR# 55612

2013.1 Vivado, FIFO Generator v10.0 - Upgrade of FIFO Generator v9.x fails with: ERROR: [IP_Flow 19-508] Validation failed for parameter 'Full_Threshold_Assert_Value_wach'


If I attempt to upgrade FIFO Generator v9.x to FIFO Generator v10.0 in Vivado 2013.1, the upgrade fails with the following warnings and errors:

upgrade_ip -vlnv [get_ips afifo]

WARNING: [IP_Flow 19-2191] Attempt to set value '1023' on disabled parameter 'Full_Threshold_Assert_Value_wach' is ignored
ERROR: [IP_Flow 19-508] Validation failed for parameter 'Full_Threshold_Assert_Value_wach'. Value '1' is out of the range (6,1023)


This is a known issue in the Vivado 2013.1 upgrade tool.

To resolve this issue, you must install the attached patch over your Vivado Design Suite 2013.1 installation.

To install the patch, unzip the contents of the ZIP file to the root directory of your Vivado installation. 

Installation instructions are available in the attached "readme" file.


Associated Attachments

Name File Size File Type 41 KB ZIP
AR# 55612
Date 09/10/2014
Status Active
Type General Article