AR# 55703

2013.2 IP Integrator - IRQ_F2P vector is not updating when connecting a vector port


When creating an IP Integrator design, and try to add a vector interrupt to the IRQ_F2P port on the processor system in Vivado IP Integrator does not update the IRQ_F2P port.


To work around this issue, use the Concat IP in the IP Catalog. For example, for a 2-bit vector, add the Concat IP as shown below:

Then, to update the Ports, right click the block diagram, and select Generate Output Products:

AR# 55703
Date 07/03/2013
Status Active
Type General Article