We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56010

14.7 CORE Generator - UCF Generator for PCI/PCIx tool gives, "WARNING: coreutil:752 - Cannot create 'xilinx.com:ip:pciucfgen:2.8 ..."


I am trying to generate a UCF file for the PCI core from the UCF Generator tool, but this is grayed out, or I get the warning below when opening the tool:

WARNING: coreutil:752 - Cannot create 'xilinx.com:ip:pciucfgen:2.8' - executable path 'com\xilinx\ip\pciucfgen_v2_8\bin\nt64' not found.
WARNING: coreutil:948 - Unable to load element 'xilinx.com:ip:pciucfgen:2.8' from repository

Is this a known issue?


Yes, this is a known issue due to missing files during the installation.
With the latest versions of ISE tools, the executable files for the "UCF Generator for PCI/PCI-x" are missing from the core folder.
More specific, the "bin" folder which contains the executables for 32 and 64 bits.

Those folders can be copied from a previous ISE tool version (14.1) or downloaded from this answer record below.
Unzip these files inside the IP core folder with the "data" and "doc" folders. Below are the paths from a default installation:


Associated Attachments

Name File Size File Type
bin_ucf_genv2_7.zip 308 KB ZIP
bin_ucfgen_v2_8.zip 308 KB ZIP
AR# 56010
Date 12/16/2013
Status Active
Type Known Issues
  • Spartan-3E
  • Virtex-5
  • Virtex-4
  • ISE Design Suite - 14.2
  • ISE Design Suite - 14.3
  • ISE Design Suite - 14.4
  • ISE Design Suite - 14.5
Page Bookmarked