We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56202

14.5 - EDK - I/O Module causes conflict when located near an AXI IP boundary


I have a simple MicroBlaze design with the I/O Module connect to the SLMB. The address space is 0x42000000.

However, if the IOBUS is enabled, it has been observed to cause conflict when writing to any AXI IP.

How can I fix this


To fix this, move the I/O Module address range to 0x00010000, or away from the AXI range.
AR# 56202
Date 05/31/2013
Status Active
Type General Article
  • EDK - 14.5
Page Bookmarked