UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56555

14.x ISE LogiCORE Peak Cancellation CFR (PC-CFR) v3.1 - Threshold locks when CFR threshold is changed from Low to High value and brought back to Low value

Description

In the LogiCORE Peak Cancellation CFR (PC-CFR) v3.1, the input threshold is not working as expected. 

The threshold value is an input to the core. 

When users change the CFR threshold from a Low to a High value and then bring it back to a Low value, the threshold value locks and does not reflect the input threshold change.

For example, on setting the value to 6 dB, increasing it to 8 dB, and bringing back to 6 dB, CFR is not responding as expected. 

This behavior can be seen on plotting CCDF.

Solution

This is known issue with the PC_CFR v3.1 core in ISE 14.x and later. 

To resolve this issue, you must download and install a patch over your ISE Design Suite 14.x installation. 

You can download the patch from the PC-CFR Evaluation Lounge page.

http://www.xilinx.com/member/pc_cfr_eval/index.htm

To install the patch, unzip the contents of the ZIP file to the root directory of your ISE tool installation. 

Installation instructions are available in the .txt file that is attached.

Attachments

Associated Attachments

AR# 56555
Date Created 06/24/2013
Last Updated 08/20/2014
Status Active
Type General Article
IP
  • Peak Cancellation Crest Factor Reduction (PC-CFR)