We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56819

2013.2 Vivado IP Flows - In Vivado IP Integrator (IPI), I cannot edit any options in Zynq Processing System 7 v5.2 block


I am trying to create a new design in IPI targeting Zynq SoC. I have added the Zynq Processing System 7 v5.2 block to the IPI block diagram, but when I open the block to make changes in the Customization GUI, it does not allow me to modify any of the settings. When I click one of the check boxes I expect it to toggle, but nothing happens.

What is wrong? How do I fix this issue?


This issue occurs with certain 64-bit Red Hat Enterprise Linux environments. If you encounter this issue, install the patch (ar56819_Vivado_2013_2_Lin_preliminary_rev1.zip) attached to the end of this answer record.

Instructions for installing the patch are included in the readme file contained in the .zip archive (vivado/patch_readme/ar56819_Vivado_2013_2_Lin_readme_preliminary_rev1.txt).

Note that this issue does not exist in Windows.


Associated Attachments

Name File Size File Type
ar56819_Vivado_2013_2_Lin_preliminary_rev1.zip 8 MB ZIP
AR# 56819
Date 10/23/2013
Status Archive
Type Known Issues
  • Zynq-7000
  • Vivado Design Suite - 2013.2
  • Processing System 7
Page Bookmarked