UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 56860

XPE 2013.x Dynamic power of 7 series transceivers do not change with process

Description

Why does dynamic power of the 7 series transceivers not change with process settings? Transceiver dynamic power changes with process settings for 6 series and Virtex-5 devices.

Solution

Starting from XPE 2013.x 7 series transceivers (GTX/GTH/GTP), dynamic power was made not to vary with process. The value shown on the GT page of the XPE are always worst case values.

However, the static power continues to vary with process settings. For the previous devices transceivers, dynamic power calculations were modeled with process.

AR# 56860
Date 08/05/2013
Status Active
Type General Article
Devices
  • Artix-7
  • Artix-7Q
  • Kintex-7
  • More
  • Kintex-7Q
  • Virtex-7
  • Virtex-7Q
  • Less