AR# 57091

2013.2 - Vivado IP Integrator cannot generate Memory Test application after exporting IPI design to SDK


I have an IPI design with MicroBlaze and MIG IP, after exporting the design to SDK, I cannot generate Memory Test example application; I can only see two applications, "Empty application" and "Peripheral Test".


The reason you cannot generate the Memory Test application is because there is no UART in the hardware.

The Hello World, Memory test, Drystone and SREC Bootloader applications require a UART in the hardware.

AR# 57091
Date 08/14/2013
Status Active
Type General Article
Devices More Less