The LogiCORE IP DisplayPort cores were removed from ISE Design Suite 14.7.
Support for the DisplayPort has been removed from the ISE Design Suite 14.7.
Existing designs can continue to use the DisplayPort v3.2 in ISE Design Suite 14.6, but all new designs should be started with 7-Series devices, using Vivado Design Suite.
Information on supported devices, features and limitations can be found in the Features and Product Specification sections of the DisplayPort Product Guide PG064, available on Xilinx.com:
If you have any questions, please contact Xilinx Technical Support:
10/23/2013 - Initial release
07/01/2014 - Fixed Typo