UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58095

MIG 3.61 Spartan-3A DDR2 - MIG 3.61 failed to generate core in Coregen 14.6

Description

MIG 3.61 fails to generate a core in Coregen 14.6 or 14.7 when I do the following:

  1. Regenerate the MIG core in batch mode by using xco and prj files generated from Coregen 14.1.

  2. Generate a design, then select Bank 3 for the Data/Control Group and bank 2 for the System Clock.

Solution

This issue is caused by a format change for the MIG version.

To work around this issue, ensure that the MIG version in the xco file is MIG 3.61, not MIG 3.6.1.

Then run Coregen -ddd to generate the core in batch mode.
AR# 58095
Date Created 10/23/2013
Last Updated 08/07/2014
Status Active
Type General Article
Devices
  • Spartan-3A
Tools
  • ISE Design Suite - 14.6
  • ISE Design Suite - 14.7
IP
  • MIG