UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58668

MIG 7 Series - Simulation of the MIG example designs using XSIM must be run through the Vivado tool; standalone support is not available even though scripts are provided

Description

Version Found: MIG 7 Series v2.0 Rev 2
Version Resolved: See (Xilinx Answer 54025)

XSIM simulations using the MIG provided xsim_run.sh/.bat fail becase the rtl files such as example_top.v/vhd, sim_tb_top.v and memory models are being referred from different locations.

Solution

The xsim_run script files will be updated at a later date with the appropriate paths. Until then, simulation using XSIM should be completed through the Vivado tool and not standalone.

Revision History
12/18/2013 - Initial release

AR# 58668
Date Created 12/04/2013
Last Updated 12/05/2013
Status Active
Type Known Issues
Devices
  • Artix-7
  • Kintex-7
  • Virtex-7
IP
  • MIG 7 Series