Version Found: MIG 7 Series v2.0 Rev 2
Version Resolved: See (Xilinx Answer 54025)
The following error may be seen when selecting a MIG 7 Series DDR3 8Gb part in the standalone IP flow in the Vivado tool:
ERROR: [IP_Flow 19-3458] Validation failed for parameter 'AXI Addr Width (C_S_AXI_ADDR_WIDTH)' for IP 'my_mig'. Value '33' is out of the range (1,32)
This error can be safely ignored as the IP is still correctly generated.
This issue only affects IP generation through the IP Catalog and not in IP Integrator flow.
12/18/2013 - Initial release