We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58939

2013.4 Vivado IP Flows - After modifying the IP configuration in IP Packager, the "Refresh" option is missing in the "IP GUI Customization Layout"


I have packaged a design in the IP Packager and I am attempting to make changes to the IP configuration (parameters, available ports, etc.).

After I have made my changes, when I go to the "IP GUI Customization Layout" page, the "Refresh" option is not available; I am not able to see the updated GUI with the changes I have made.


If the Refresh option is not available on the IP GUI Customization Layout, it can be restored using the following steps:

  1. Select the IP Identification page.
  2. Change any value (e.g., change the library value from user to user1).
  3. Click on any other field.
  4. Click on the changed field and change it back to the previous value (e.g., change the library value from user1 to user).
  5. Select IP GUI Customization Layout page, then click on the Refresh link.

A patch (ar58939_Vivado_2013_4_preliminary_rev1.zip), located at the end of this answer record, has been created to resolve this issue in Vivado Design Suite 2013.4.

This issue will be resolved in Vivado Design Suite 2014.1.


Associated Attachments

Name File Size File Type
ar58939_Vivado_2013_4_preliminary_rev1.zip 22 MB ZIP
AR# 58939
Date 04/17/2014
Status Archive
Type Known Issues
  • Vivado Design Suite - 2013.4
  • Vivado Design Suite
Page Bookmarked