We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 58941

2013.4 SDK - Create Zynq Boot Image Default FSBL/bitstream order is incorrect


After creating a new Zynq project using Vivado Design Suite 2013.4, I want to create a bootimage with FSBL, bitstream, and simple application. If I select the FSBL project in the Project Window and I open "Zynq Create Boot Image," the GUI automatically populates the settings.


The problem is that the bitstream is located before the FSBL, and in this configuration the generated bootimage will not boot.

See Boot image partitions in the following image:

To work around this issue, manually remove the bitstream and add it back after the FSBL entry.

AR# 58941
Date 01/06/2014
Status Active
Type Known Issues
  • Zynq-7000
  • Vivado Design Suite - 2013.4