UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58985

2013.4, 14.7 - SDK - Cannot add breakpoints when remote debugging via Linux in SDK

Description

I have a simple SDK application that I want to debug remotely on Linux via the remote debug capabilities in the SDK tool, however, I cannot set the breakpoints.

How can I resolve this problem?

Solution

If the symbol file is not added, then you will not be able to add breakpoints.

To add the symbol (ELF) file, right-click on the processor (under the Debug tab) as shown below:


Note: The ELF file must reside on the machine that the HW_SERVER was launched.


AR# 58985
Date Created 01/03/2014
Last Updated 01/06/2014
Status Active
Type General Article
Tools
  • EDK - 14.7
  • Vivado Design Suite - 2013.4