AR# 59003

Kintex-7 FPGA Embedded Kit - Why do I get an error stating the TEMAC license cannot be found when generating the Kintex-7 FPGA Embedded Kit TRD in 2013.2?

Description

Why do I get an error stating the TEMAC license is not found when generating the Kintex-7 FPGA Embedded Kit TRD in 2013.2?

[Common 17-69] Command failed: This design contains one or more cores for which bitstream generation is not supported: TRIMAC_GEN

Solution

This error occurs because, by default, no license for the Tri Mode Ethernet MAC core is provided.

You will need to either purchase a license or generate a hardware evaluation core.

To get the TRD working, you will need to at least obtain a Hardware Evaluation License, which allow the design to run for ~4-8 hours before requiring the device to be reprogrammed.

More information about how to generate a Hardware Evaluation License can be found in the Licensing Solution Center:
http://www.xilinx.com/support/licensing_solution_center.htm

AR# 59003
Date 01/10/2014
Status Active
Type General Article
Devices
Tools
IP
Boards & Kits