We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59080

Vivado - How to show a cells schematic with only site name information


How can I show a cells schematic with only site name information?


You can try the following two methods:
  • Using the Vivado IDE: 
  1. Search for the site name in Find window.
  2. Select the site in the result window.
  3. Select the cell in the site in the Device window.
  4. Right click -> Schematic [F4]
  • Use the below command in the Tcl console, and then Right click -> Schematic [F4]
    In this example the site name is RAMB18_X0Y1:
select_objects [get_cells -of [get_sites RAMB18_X0Y1]]
AR# 59080
Date 12/11/2014
Status Active
Type General Article
  • Vivado Design Suite
Page Bookmarked