AR# 59714

MIG 7 Series - recustomization of MIG core in Vivado removes and fails to regenerate some files

Description

Version Found: MIG 7 Series v2.0 Rev 2
Version Resolved: See (Xilinx Answer 54025)

When regenerating the MIG 7 Series IP core, files are removed and then regenerated. 

However, the following files are not regenerated which will cause simulation and possibly implementation errors:

<component_name>_mig.v/.vhd file 

<component_name>_mig_sim.v/.vhd


Solution

This is a known issue in Vivado 2013.4 and will be fixed in a future release. 

You can work around the problem by saving the previously generated files and replacing them after regeneration has completed or you can generate a new core.

Revision History

03/11/2014 - Initial Release


Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado N/A N/A
AR# 59714
Date 04/16/2014
Status Active
Type Known Issues
Devices
IP