UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59731

Zynq-7000 AP SoC ZC702 Evaluation Kit - 2013.4 Base TRD - Monitor may not synch-up

Description

When using the 2013.4 ZC702 Base Targeted Reference Design, an issue can arise where a particular monitor does not synch up and QT GUI does not appear on the display monitor as expected.

This Answer Record includes a workaround that can be applied in this case.

Solution

If a particular monitor does not synch up when using the 2013.4 ZC702 Base Targeted Reference Design, and QT GUI does not appear on the display monitor as expected, please follow the steps below:

  1. Ensure that the board is powered and connected to the display monitor.
  2. Plug out the HDMI display cable from the ZC702 base board.
  3. Plug the HDMI cable back in to the ZC702 base board.
  4. The QT GUI should appear on the monitor; click the Min button to set the GUI in the correct position.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
52941 Zynq-7000 AP SoC Base Targeted Reference Design - Release Notes and Known Issues Master Answer Record N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
52941 Zynq-7000 AP SoC Base Targeted Reference Design - Release Notes and Known Issues Master Answer Record N/A N/A
AR# 59731
Date Created 03/11/2014
Last Updated 05/09/2014
Status Active
Type General Article
Boards & Kits
  • Zynq-7000 All Programmable SoC ZC702 Evaluation Kit