UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59879

How do I generate the report that provides my design's Device Vulnerability Factor?

Description

UG116 mentions that ISE and Vivado can both create the SEU report that provides the DVF factor.  

How can this be done?

Solution

ISE:

You will need to Import your ISE project into Planahead and then run the following tcl commands
open_rtl_design

report_power -verbose -file power_report.txt -seu C:/test/seu_report.txt

Vivado:

This functionality is not yet supported.  It is planned to be included in a later release. 2014.x


AR# 59879
Date Created 03/20/2014
Last Updated 05/12/2014
Status Active
Type General Article
Devices
  • Artix-7
  • Kintex-7
  • Virtex-5
  • More
  • Virtex-7
  • Virtex-6
  • Spartan-6
  • Less
Tools
  • PlanAhead - 13
  • PlanAhead - 14