We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5990

JTAGPGMR 1.5x: Using parallel port beyond LPT1 and LPT2


Keywords: LPT1, LPT2, LPT3, parallel, cable, JTAG

Urgency: Standard

General Description: Any ports beyond LPT1 and LPT2 do not show up in
the drop down window in JTAG Programmer.


The JTAG Programmer only supports LPT1 or LPT2.
AR# 5990
Date 10/01/2008
Status Archive
Type General Article
Page Bookmarked