We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59990

MIG Ultrascale - IPI MIG simulation does not have memory models available


Version Found: v5.0
Version Resolved: See (Xilinx Answer 58435)

After adding a MIG core to an IPI project and attempting to run a simulation, the simulation will fail because the MIG IPI simulation models do not exist. 


Models are not currently shipped for IPI MIG.  

To work around this until the models are available, the MIG core will need to be simulated stand-alone (i.e. outside of IPI).

Revision History:
04/16/2014 - Initial Release

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58435 UltraScale/UltraScale+ Memory IP - Master Release Notes and Known Issues N/A N/A
AR# 59990
Date 09/05/2014
Status Active
Type Known Issues
  • Kintex UltraScale
  • Virtex UltraScale
  • MIG UltraScale
Page Bookmarked