UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60171

LogiCORE IP Video Deinterlacer v3.00.a, v4.0 - Why does changing the base and high address in the configuration GUI have no effect on the Video Deinterlacer core?

Description

Why does changing the base and high address in the configuration GUI have no effect on the Video Deinterlacer core?

Solution

This is a known issue with the Video Deinterlacer v3.00.a and v4.0. 

If a user attempts to change the base address and the high address these may be ignored in some cases, but it will not be obvious to the user.

The user can work around this by always using the default values for the address.

This issue will be resolved in a future version of the Video Deinterlacer.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54537 LogiCORE IP Video Deinterlacer - Release Notes and Known Issues for Vivado 2013.1 and newer tool versions N/A N/A
AR# 60171
Date Created 04/07/2014
Last Updated 04/16/2014
Status Active
Type General Article
IP
  • Video Deinterlacer